Siemens SIMATIC ET 200SP Manual - Halaman 23

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 40 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

4.2

Declaration of parameters

Diagnostics: No supply voltage L+

Enabling the diagnostic alarm for missing or insufficient supply voltage L+.

Diagnostics port

This parameter allows the enabling of the diagnostics for the selected port.

The possible diagnostics are dependent on the IO-Link device used. Additional information

about the diagnostic interrupts can be found in the description of the utilized IO-Link device.

Potential group

With the "Potential group" parameter, you specify whether the module is inserted on a light-

colored or dark-colored BaseUnit.

A potential group always starts with an I/O module that is inserted on a light-colored

BaseUnit. All modules inserted to the right of this on dark-colored BaseUnits belong to the

same potential group, because the dark-colored BaseUnits are supplied via the light-colored

BaseUnits.

The potential group ends with a new light-colored BaseUnit or the end of the station.

PortQualifierInformation

This parameter enables the PortQualifierInformation (PQI).

The PQI provides information on the port and IO-Link device status.

Port configuration without P7-PCT

This parameter enables the port configuration without S7-PCT for the module.

Communication module IO-Link Master CM 4xIO-Link (6ES7137-6BD00-0BA0)

Manual, 10/2017, A5E03856846-AD

Parameters/address space

4.2 Declaration of parameters