Siemens Simatic S7-1500 Manuel - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens Simatic S7-1500. Siemens Simatic S7-1500 46 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens Simatic S7-1500 : Manuel (40 pages), Manuel (37 pages), Manuel (47 pages), Manuel (24 pages), Manuel (34 pages), Manuel de l'utilisateur (45 pages), Manuel (27 pages), Manuel de configuration (20 pages), Manuel (47 pages), Manuel (43 pages), Manuel (48 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (50 pages), Manuel (30 pages), Manuel (41 pages), Manuel (50 pages), Manuel (40 pages), Programmation de la sécurité Manualline (48 pages), Manuel d'instructions pour la communication (36 pages), Manuel (40 pages), Manuel (25 pages), Manuel (42 pages), Description de l'application (50 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (41 pages), Manuel (38 pages), Manuel (35 pages), Manuel (39 pages), Manuel (28 pages), Manuel (35 pages), Manuel de l'équipement (35 pages), Manuel (50 pages), Manuel de l'équipement (32 pages), Manuel de l'équipement (38 pages), Manuel (29 pages), Manuel de l'équipement (38 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages), Manuel (45 pages)

4 Configuration/Engineering

Device parameters

The device describing parameters are relevant for the Scanner, as it uses this

information to verify the real existing device against the configured device. In case

there is a mismatch the operation of this device is not started.

Such information is:

•

vendorIdentifier, in the EDS file called "VendCode" is an ODVA® assigned

number to the manufacturer of this device

•

productType, in the EDS file called "ProdType" is a standardized number

identifying the type of the device

•

productCode, the "ProdCode" called number identifies this product together

with its type and vendor ID.

•

revisionMajor, the major revision number, together with the minor revision

number serves the purpose of compatibility check

•

revisionMinor, as above serves the minor revision number the purpose of a

compatibility check.

They can be found at the section [Device] as shown in the below figure.

Figure 4-4: EDS file [Device] section

For the application example the transfer into the configuration inside the

EnetIoSystem data block looks like this:

Figure 4-5: [Device] section parameters

Further parameters are taken from different other sections of the EDS file.

EtherNet/IP Scanner

Entry-ID: 109782314,

V1.1.0,

04/2021