Siemens Simatic S7-1500 Manuel de l'équipement - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'équipement pour {nom_de_la_catégorie} Siemens Simatic S7-1500. Siemens Simatic S7-1500 32 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens Simatic S7-1500 : Manuel (40 pages), Manuel (37 pages), Manuel (47 pages), Manuel (24 pages), Manuel (34 pages), Manuel de l'utilisateur (45 pages), Manuel (27 pages), Manuel de configuration (20 pages), Manuel (47 pages), Manuel (43 pages), Manuel (48 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (50 pages), Manuel (30 pages), Manuel (41 pages), Manuel (50 pages), Manuel (40 pages), Programmation de la sécurité Manualline (48 pages), Manuel d'instructions pour la communication (36 pages), Manuel (40 pages), Manuel (25 pages), Manuel (42 pages), Description de l'application (50 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (41 pages), Manuel (46 pages), Manuel (38 pages), Manuel (35 pages), Manuel (39 pages), Manuel (28 pages), Manuel (35 pages), Manuel de l'équipement (35 pages), Manuel (50 pages), Manuel de l'équipement (38 pages), Manuel (29 pages), Manuel de l'équipement (38 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages), Manuel (45 pages)

Product overview

2.2 Functions

2.2

Functions

2.2.1

The function records the number of switching cycles of the output and thus the switching

cycles of a connected actuator, such as those of solenoid valves. When the specified number

of switching cycles is reached, the "Limit value warning" maintenance interrupt is triggered,

provided it is configured and enabled. When replacing the actuator, you can reset the

switching cycle counter from the user program.

When replacing modules, you have the option of pre-initializing the switching cycle counter

from the user program.

Typical areas of application:

• Recording the number of switching cycles of the connected devices, e.g. solenoid valves

or load contactors

• Predictive maintenance

Advantages

• You configure this function instead of programming.

• "Monitoring" of each individual channel is possible. You can select which outputs are

"monitored".

• You can adapt the plant configuration flexibly and individually.

• Easy to service and maintain. You can enable and disable the switching cycle counter via

the user program.

• Increase in plant availability. You can schedule actuator replacement in advance for the

next maintenance cycle.

Requirement

Firmware version as of V2.2.0 of the module.

Configuration

You configure the switching cycle counter with the following parameters:

• Switching cycle counter enabled/disabled

• Trigger maintenance interrupt when the limit is reached

• Set limit for maintenance alarm

Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0)

Equipment Manual, 12/2021, A5E03485733-AE