Siemens Simatic S7-1500 Ekipman Kılavuzu - Sayfa 11

Endüstriyel Ekipmanlar Siemens Simatic S7-1500 için çevrimiçi göz atın veya pdf Ekipman Kılavuzu indirin. Siemens Simatic S7-1500 32 sayfaları. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ayrıca Siemens Simatic S7-1500 için: Manuel (40 sayfalar), Manuel (37 sayfalar), Manuel (47 sayfalar), Manuel (24 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (45 sayfalar), Manuel (27 sayfalar), Yapılandırma Kılavuzu (20 sayfalar), Manuel (47 sayfalar), Manuel (43 sayfalar), Manuel (48 sayfalar), Manuel (26 sayfalar), Manuel (28 sayfalar), Manuel (50 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Manuel (50 sayfalar), Manuel (30 sayfalar), Manuel (41 sayfalar), Manuel (50 sayfalar), Manuel (40 sayfalar), Güvenlik Programlama Manualline (48 sayfalar), İletişim Talimat Kılavuzu (36 sayfalar), Manuel (40 sayfalar), Manuel (25 sayfalar), Manuel (42 sayfalar), Uygulama Açıklaması (50 sayfalar), Manuel (28 sayfalar), Manuel (33 sayfalar), Manuel (49 sayfalar), Manuel (36 sayfalar), Manuel (41 sayfalar), Manuel (46 sayfalar), Manuel (38 sayfalar), Manuel (35 sayfalar), Manuel (39 sayfalar), Manuel (28 sayfalar), Manuel (35 sayfalar), Ekipman Kılavuzu (35 sayfalar), Manuel (50 sayfalar), Ekipman Kılavuzu (38 sayfalar), Manuel (29 sayfalar), Ekipman Kılavuzu (38 sayfalar), Manuel (34 sayfalar), Manuel (36 sayfalar), Ekipman Kılavuzu (50 sayfalar), Manuel (45 sayfalar)

Product overview

2.2 Functions

2.2

Functions

2.2.1

The function records the number of switching cycles of the output and thus the switching

cycles of a connected actuator, such as those of solenoid valves. When the specified number

of switching cycles is reached, the "Limit value warning" maintenance interrupt is triggered,

provided it is configured and enabled. When replacing the actuator, you can reset the

switching cycle counter from the user program.

When replacing modules, you have the option of pre-initializing the switching cycle counter

from the user program.

Typical areas of application:

• Recording the number of switching cycles of the connected devices, e.g. solenoid valves

or load contactors

• Predictive maintenance

Advantages

• You configure this function instead of programming.

• "Monitoring" of each individual channel is possible. You can select which outputs are

"monitored".

• You can adapt the plant configuration flexibly and individually.

• Easy to service and maintain. You can enable and disable the switching cycle counter via

the user program.

• Increase in plant availability. You can schedule actuator replacement in advance for the

next maintenance cycle.

Requirement

Firmware version as of V2.2.0 of the module.

Configuration

You configure the switching cycle counter with the following parameters:

• Switching cycle counter enabled/disabled

• Trigger maintenance interrupt when the limit is reached

• Set limit for maintenance alarm

Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0)

Equipment Manual, 12/2021, A5E03485733-AE