Siemens Simatic S7-300 Pour commencer - Page 20

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Siemens Simatic S7-300. Siemens Simatic S7-300 32 pages. Automation systems, controlling a physical axis
Également pour Siemens Simatic S7-300 : Manuel de l'utilisateur (34 pages), Manuel (21 pages), Mode d'emploi (4 pages), Mode d'emploi (5 pages), Manuel (35 pages), Pour commencer (8 pages), Pour commencer (16 pages), Description de l'application (24 pages), Manuel (18 pages), Manuel (32 pages), Manuel d'installation et de matériel (20 pages)

Learning units

3.8 7. Step: Configuring the axis(axes) with S7T Config

Step

Activity

Confirm with "OK".

In the HW Config, select the Station > Save and Compile

menu command in order to close the HW Config.

3.8

7. Step: Configuring the axis(axes) with S7T Config

Important information

In this step, you create your technology objects (e.g. axes) with S7T Config. Use

"Technology Objects Management" to generate a technology DB for each TO. Do not copy

the technology DBs in order to ensure a defined assignment between the technology DB and

its TO.

Procedure

Step

Activity

In the left half of the SIMATIC Manager window, select the SIMATIC 300(1) > CPU 317T-2 DP > S7-

Programm > Technology entry.

Double-click "Technology objects" to open S7T Config.

Result: "Technology Objects Management" opens. The system automatically runs S7T Config if you have

not configured any technology objects yet, as in this example.

You may also run S7T Config without using "Technology Objects Management". Select the "Technology

Objects" object and then select the Options > Configure technology menu command.

Result: "S7T Config" opens.

Result

The system compiles your project, and adds

the "Technological Objects" object to the

project window in SIMATIC Manager.

Result

CPU 317T-2 DP: Controlling a physical axis

Getting Started, 03/2008, A5E00251786-05