Siemens Simatic S7-300 Come iniziare - Pagina 20

Sfoglia online o scarica il pdf Come iniziare per Apparecchiature industriali Siemens Simatic S7-300. Siemens Simatic S7-300 32. Automation systems, controlling a physical axis
Anche per Siemens Simatic S7-300: Manuale d'uso (34 pagine), Manuale (21 pagine), Istruzioni per l'uso (4 pagine), Istruzioni per l'uso (5 pagine), Manuale (35 pagine), Come iniziare (8 pagine), Come iniziare (16 pagine), Descrizione dell'applicazione (24 pagine), Manuale (18 pagine), Manuale (32 pagine), Manuale di installazione e hardware (20 pagine)

Stampa la pagina
Siemens Simatic S7-300 Come iniziare
Learning units

3.8 7. Step: Configuring the axis(axes) with S7T Config

Step
Activity
9
Confirm with "OK".
10
In the HW Config, select the Station > Save and Compile
menu command in order to close the HW Config.
3.8
7. Step: Configuring the axis(axes) with S7T Config
Important information
In this step, you create your technology objects (e.g. axes) with S7T Config. Use
"Technology Objects Management" to generate a technology DB for each TO. Do not copy
the technology DBs in order to ensure a defined assignment between the technology DB and
its TO.
Procedure
Step
Activity
1
In the left half of the SIMATIC Manager window, select the SIMATIC 300(1) > CPU 317T-2 DP > S7-
Programm > Technology entry.
Double-click "Technology objects" to open S7T Config.
Result: "Technology Objects Management" opens. The system automatically runs S7T Config if you have
not configured any technology objects yet, as in this example.
You may also run S7T Config without using "Technology Objects Management". Select the "Technology
Objects" object and then select the Options > Configure technology menu command.
Result: "S7T Config" opens.
20
Result
The system compiles your project, and adds
the "Technological Objects" object to the
project window in SIMATIC Manager.
Result
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05