Siemens SINAMICS G120 Pour commencer - Page 25

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Siemens SINAMICS G120. Siemens SINAMICS G120 46 pages. Using blocksize converters in marine applications
Également pour Siemens SINAMICS G120 : Manuel d'utilisation (32 pages), Pour commencer (30 pages), Instructions pour l'installation du matériel (2 pages), Instructions d'installation et manuel du propriétaire (2 pages), Instructions d'installation (2 pages), Instructions d'installation (2 pages), Mode d'emploi Compact (32 pages), Manuel (42 pages), Pour commencer (50 pages), Manuel de l'appareil (34 pages), Manuel d'installation rapide (2 pages), Description de l'application (50 pages), Mode d'emploi Compact (2 pages), Manuel (31 pages), Manuel d'application (34 pages), Mode d'emploi Compact (2 pages), Mode d'emploi Compact (2 pages)

Terminal strips behind the lower front door

Note

Short-circuit at the Control Unit output terminals at full load

If a short circuit occurs at the output terminals when the CU is fully loaded, then the Power

Module switches off the internal power supply for the Control Unit.

3.2.3

Finding a suitable setting for the interfaces

The inputs and outputs of the frequency inverter and the fieldbus interface have specific

functions when set to the factory settings.

When you put the frequency inverter into operation, you can change the function of each of

its inputs and outputs and the setting of the fieldbus interface.

To make the setting process easier, the inverter has various predefined assignments

(macros).

Only the inputs and outputs whose functions change by selecting a specific assignment, are

shown on the following pages.

Converters with CU250S-2 Control Units

Getting Started, 10/2013, FW V4.6, A5E32899990B AA

Installing

3.2 Installing Control Unit