Siemens SINAMICS G120 Description de l'application - Page 41

Parcourez en ligne ou téléchargez le pdf Description de l'application pour {nom_de_la_catégorie} Siemens SINAMICS G120. Siemens SINAMICS G120 50 pages. Using blocksize converters in marine applications
Également pour Siemens SINAMICS G120 : Pour commencer (46 pages), Manuel d'utilisation (32 pages), Pour commencer (30 pages), Instructions pour l'installation du matériel (2 pages), Instructions d'installation et manuel du propriétaire (2 pages), Instructions d'installation (2 pages), Instructions d'installation (2 pages), Mode d'emploi Compact (32 pages), Manuel (42 pages), Pour commencer (50 pages), Manuel de l'appareil (34 pages), Manuel d'installation rapide (2 pages), Mode d'emploi Compact (2 pages), Manuel (31 pages), Manuel d'application (34 pages), Mode d'emploi Compact (2 pages), Mode d'emploi Compact (2 pages)

6 Operation of the Application

6.2 Operation of the application with a panel

6.2.2.2

Function menu

Figure 6-2

From the Function menu, you can call the individual operating screens:

Table 6-1

Operating

screen

Power and Reset

Status

Error

MoveVelocity

MoveJog

Halt

SINAMICS G120 as a Speed Axis on the S7-1500

V1.0a, Entry ID: 78788716

Visualization of MC_Power and MC_Reset.

MC_Power is used to enable the axis (On/Off).

MC_Reset is used to acknowledge errors of the axis.

Visualization of the status bits of the Axis TO.

Visualization of the error bits of the Axis TO.

Visualization of MC_MoveVelocity.

This FB is used to start an (endless) axis motion at the specified

velocity.

Visualization of MC_MoveJog.

This FB allows you to "jog" the axis.

Visualization of MC_MoveHalt.

This FB is used to stop the axis.

Function