Siemens SINAMICS G120 Deskripsi Aplikasi - Halaman 41

Jelajahi secara online atau unduh pdf Deskripsi Aplikasi untuk Peralatan Industri Siemens SINAMICS G120. Siemens SINAMICS G120 50 halaman. Using blocksize converters in marine applications
Juga untuk Siemens SINAMICS G120: Memulai (46 halaman), Panduan Petunjuk Pengoperasian (32 halaman), Memulai (30 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Petunjuk Pemasangan dan Panduan Pemilik (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Pengoperasian yang Ringkas (32 halaman), Manual (42 halaman), Memulai (50 halaman), Panduan Perangkat (34 halaman), Panduan Pemasangan Cepat (2 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Manual (31 halaman), Manual Aplikasi (34 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman)

6 Operation of the Application

6.2 Operation of the application with a panel

6.2.2.2

Function menu

Figure 6-2

From the Function menu, you can call the individual operating screens:

Table 6-1

Operating

screen

Power and Reset

Status

Error

MoveVelocity

MoveJog

Halt

SINAMICS G120 as a Speed Axis on the S7-1500

V1.0a, Entry ID: 78788716

Visualization of MC_Power and MC_Reset.

MC_Power is used to enable the axis (On/Off).

MC_Reset is used to acknowledge errors of the axis.

Visualization of the status bits of the Axis TO.

Visualization of the error bits of the Axis TO.

Visualization of MC_MoveVelocity.

This FB is used to start an (endless) axis motion at the specified

velocity.

Visualization of MC_MoveJog.

This FB allows you to "jog" the axis.

Visualization of MC_MoveHalt.

This FB is used to stop the axis.

Function