Epson XP-600 Manuel de base - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de base pour {nom_de_la_catégorie} Epson XP-600. Epson XP-600 24 pages. Xp-600 impresora small-in-one
Également pour Epson XP-600 : Manuel de démarrage (4 pages), Manuel rapide (40 pages), Manuel (46 pages), Commencer ici (4 pages), Spécifications des produits (2 pages), (Guide d'installation (4 pages)

Basic Guide

Slide the edge guides to the edges of the paper.

Keep the cassette flat and insert it back into the

product carefully and slowly.

Note:

❏ Leave enough space in front of the product for the

paper to be fully ejected.

❏ Do not remove or insert the paper cassette while the

product is operating.

Into the rear paper feed slot

Note:

❏ Rear paper feed slot may not be available for some

models.

❏ Even though you can print on paper with a thickness

of 0.05 to 0.6 mm, some hard paper may not be fed

correctly even if the thickness is within this range.

Send your print job to the product (from your

computer, or by using the control panel).

Note:

Before sending your print job, you cannot load paper into

the rear paper feed slot.

Paper and Media Handling

Open the rear paper feed slot cover and then pull

out the paper support.

Slide the edge guide.

Load a single sheet of paper with the printable

side face-up at the center of the rear paper feed

slot, and then set the edge guide. The printable

side is often whiter or brighter than the other

side.