Epson XP-600 기본 매뉴얼 - 페이지 9

{카테고리_이름} Epson XP-600에 대한 기본 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson XP-600 24 페이지. Xp-600 impresora small-in-one
Epson XP-600에 대해서도 마찬가지입니다: 시작 매뉴얼 (4 페이지), 빠른 매뉴얼 (40 페이지), 매뉴얼 (46 페이지), 여기에서 시작 (4 페이지), 제품 사양 (2 페이지), (설치 가이드 (4 페이지)

페이지 인쇄
Epson XP-600 기본 매뉴얼
Basic Guide
F
Slide the edge guides to the edges of the paper.
G
Keep the cassette flat and insert it back into the
product carefully and slowly.
Note:
❏ Leave enough space in front of the product for the
paper to be fully ejected.
❏ Do not remove or insert the paper cassette while the
product is operating.

Into the rear paper feed slot

Note:
❏ Rear paper feed slot may not be available for some
models.
❏ Even though you can print on paper with a thickness
of 0.05 to 0.6 mm, some hard paper may not be fed
correctly even if the thickness is within this range.
A
Send your print job to the product (from your
computer, or by using the control panel).
Note:
Before sending your print job, you cannot load paper into
the rear paper feed slot.
Paper and Media Handling
B
Open the rear paper feed slot cover and then pull
out the paper support.
C
Slide the edge guide.
D
Load a single sheet of paper with the printable
side face-up at the center of the rear paper feed
slot, and then set the edge guide. The printable
side is often whiter or brighter than the other
side.
7