Siemens SIWAREX WL280 Manuel d'utilisation - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SIWAREX WL280. Siemens SIWAREX WL280 42 pages. Pressure piece sets rn-s sa
Imprimer la page
Installation
5.2 Mounting the pressure piece set
Procedure
NOTICE
Personal injuries, damage to the load cells
Insufficiently secured loads can fall and cause injuries or material damage. Therefore, use
suitable hoisting equipment to lift the load bearing implement. Observe the appropriate
safety regulations.
NOTICE
Destruction of the load cells and the pressure piece set
Check that the load cells and installation unit are installed correctly, e.g. by checking the
mounting dimensions and oscillation distances. Incorrect assembly can lead to the
destruction of the load cell and the installation unit.
Ensure that the cable does not become damaged or is cut off.
To prevent water from penetrating, lay the cables through cable glands in the form of a
vertical downwards loop.
Adapt the procedure to the installation conditions. In the case of the small 60 kg to 280 kg
cells, observe the mounting position.
①
Bearing surfaces of the pendulum support
②
RN-S SA 60 kg to 280 kg load cell ⇒ Caution: Note the mounting position of the pendulum support!
③
RN-S SA 0.5 t / 1.0 t load cell
Figure 5-4
Inserting load cells
1. Grease the bearing surfaces of the pendulum support with a bearing lubricant.
2. Insert load cell with the pendulum support.
3. Lower the load bearing implement onto the load cells.
26
Operating Instructions, 09/2013, A5E32962759A-01
RN-S SA