Samsung 690 Series Manuel d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Samsung 690 Series. Samsung 690 Series 50 pages. Series 6
Également pour Samsung 690 Series : Spécifications (36 pages), Manuel de l'utilisateur (40 pages), Manuel d'installation (48 pages)
Imprimer la page
‐ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
‐ When connecting an external device, match the colour of the connection terminal to the cable.
VARIABLE AUDIO
OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the
1
Variable port.
2 VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-CTRL port.
USB (5V 0.5A)
,
USB (HDD/1.0A) / CLONING
3
‐ Connector for software upgrades and My Downloads, etc.
‐ Service connection.
HDMI IN 2
4
HDMI IN 1 (DVI)
,
HDMI IN 3 (ARC)
5
‐ No sound connection is needed for an HDMI to HDMI connection.
‐ Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio.
6 LAN: Connect to a wired LAN using CAT 5 cable.
7 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules so as to improve device use and convenience.
DIGITAL AUDIO OUT (OPTICAL)
8
ANT
IN(AIR/CABLE): To view television channels correctly, a signal must be received by the set from one of the following
9
sources: An outdoor antenna; A cable television network.
LAN OUT
0
DATA
!
‐ Used to support data communication between the TV and the SBB.
‐ The TV jack type is RJ-12.
HEADPHONE JACK
@
‐ Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the
soundfrom the built-in speakers will be disabled.
HP-ID
: Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box.
#
When connecting Headphone to Headphone Box, it works same as Headphone function.
COMPONENT/AV IN
$
‐ Connects component video / audio.
‐ Connect component video cables (not supplied) to the component jacks ("PR", "PB", "Y") on the rear of your TV and
the other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks and
cables.
‐ If you want to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and
connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.
‐ The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
‐ For AV devices, connect RCA audio cables (not supplied) to "R - AUDIO - L" on the rear of the TV set and the other
ends to corresponding audio out jacks on an external device.
VIDEO OUT
%
DOOR EYE
^
PC/DVI AUDIO
IN: Connect to the audio output jack on your PC.
&
PC
IN: Connect to the video output jack on your PC.
*
8
English