Samsung 690 Series Manual de instalação - Página 8

Procurar online ou descarregar pdf Manual de instalação para Monitor Samsung 690 Series. Samsung 690 Series 50 páginas. Series 6
Também para Samsung 690 Series: Especificações (36 páginas), Manual do utilizador (40 páginas), Manual de instalação (48 páginas)

Imprimir página

‐ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

‐ When connecting an external device, match the colour of the connection terminal to the cable.

VARIABLE AUDIO

OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the

Variable port.

2 VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-CTRL port.

USB (5V 0.5A)

USB (HDD/1.0A) / CLONING

‐ Connector for software upgrades and My Downloads, etc.

‐ Service connection.

HDMI IN 2

HDMI IN 1 (DVI)

HDMI IN 3 (ARC)

‐ No sound connection is needed for an HDMI to HDMI connection.

‐ Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter

(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio.

6 LAN: Connect to a wired LAN using CAT 5 cable.

7 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional

modules so as to improve device use and convenience.

DIGITAL AUDIO OUT (OPTICAL)

ANT

IN(AIR/CABLE): To view television channels correctly, a signal must be received by the set from one of the following

sources: An outdoor antenna; A cable television network.

LAN OUT

DATA

‐ Used to support data communication between the TV and the SBB.

‐ The TV jack type is RJ-12.

HEADPHONE JACK

‐ Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the

soundfrom the built-in speakers will be disabled.

HP-ID

: Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box.

When connecting Headphone to Headphone Box, it works same as Headphone function.

COMPONENT/AV IN

‐ Connects component video / audio.

‐ Connect component video cables (not supplied) to the component jacks ("PR", "PB", "Y") on the rear of your TV and

the other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks and

cables.

‐ If you want to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and

connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.

‐ The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

‐ For AV devices, connect RCA audio cables (not supplied) to "R - AUDIO - L" on the rear of the TV set and the other

ends to corresponding audio out jacks on an external device.

VIDEO OUT

DOOR EYE

PC/DVI AUDIO

IN: Connect to the audio output jack on your PC.

IN: Connect to the video output jack on your PC.

English