Epson 1925W - POWERLITE Multimedia Projector Manuel d'installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Epson 1925W - POWERLITE Multimedia Projector. Epson 1925W - POWERLITE Multimedia Projector 4 pages. Epson powerlite 1925w projector
Également pour Epson 1925W - POWERLITE Multimedia Projector : Manuel d'utilisation (47 pages), Manuel de l'utilisateur (1 pages), Spécifications (4 pages), Instructions de mise à jour (4 pages), Déclaration de conformité (4 pages), Liste des pièces (1 pages), Brochure & Specs (4 pages), Manuel de l'utilisateur (25 pages), Manuel de mise à jour (8 pages), Manuel de l'utilisateur (25 pages), Manuel d'installation (3 pages)

Imprimer la page
Epson 1925W - POWERLITE Multimedia Projector Manuel d'installation rapide
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
3
Open the A/V Mute slide all the way.
4
Press the
power button on the projector or remote control.
Power light
Power button
The power light flashes green, then stays on.
NOTE: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
NOTE: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the gray foot release lever and lift the front of
the projector. Release the lever to lock the foot in position.
power button twice, then
3
Press the Focus buttons to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
Zoom
4
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
5
If your image looks like
projector to correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Turn off projector
display and sound
Change
presentation
slides (USB
connection only)
Navigate
projector
menus
You can use the remote control to operate the projector. With the USB cable,
you can use the remote as a wireless mouse. For more information on using
the remote control, see your User's Guide.
or
, you've placed the projector off to
or
or
, press the
buttons on the
Choose which
source to display
Control projector volume