Cisco 6961 - Unified IP Phone Standard VoIP Manuel de configuration

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco 6961 - Unified IP Phone Standard VoIP. Cisco 6961 - Unified IP Phone Standard VoIP 16 pages. Unified communications manager express
Également pour Cisco 6961 - Unified IP Phone Standard VoIP : Fiche technique (5 pages), Notes de mise à jour (18 pages), Fiche technique (5 pages), Manuel de l'utilisateur (38 pages), Manuel d'administration (14 pages), Caractéristiques (29 pages), Manuel de référence (4 pages), Manuel d'administration (19 pages), Manuel d'utilisation (6 pages), Carte de référence rapide (2 pages), Manuel de référence rapide (2 pages)

Setting Up the Cisco Unified IP Phone

This chapter includes the following topics, which help you install the Cisco Unified IP Phone on an IP

telephony network:

•

Before you install a Cisco Unified IP phone, you must decide how to configure the phone in your

Note

network. Then you can install the phone and verify its functionality. For more information, see

Chapter 2, "Preparing to Install the Cisco Unified IP Phone on Your Network."

Before installing the Cisco Unified IP Phone, review the requirements in these sections:

•

For the Cisco Unified IP Phone to successfully operate as a Cisco Unified IP Phone endpoint in your

network, your network must meet the following requirements:

•

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24567-01

Before You Begin, page 3-1

Footstand, page 3-9

Network Requirements, page 3-1

Cisco Unified Communications Manager Configuration, page 3-2

Working VoIP network:

VoIP configured on your Cisco routers and gateways

Cisco UnifiedCM installed in your network and configured to handle call processing

IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask

C H A P T E R

3-1