Cisco 6961 - Unified IP Phone Standard VoIP Setup Manual

Jelajahi secara online atau unduh pdf Setup Manual untuk Telepon IP Cisco 6961 - Unified IP Phone Standard VoIP. Cisco 6961 - Unified IP Phone Standard VoIP 16 halaman. Unified communications manager express
Juga untuk Cisco 6961 - Unified IP Phone Standard VoIP: Lembar data (5 halaman), Catatan Rilis (18 halaman), Lembar data (5 halaman), Panduan Pengguna (38 halaman), Panduan Administrasi (14 halaman), Fitur (29 halaman), Panduan Referensi (4 halaman), Panduan Administrasi (19 halaman), Panduan Untuk Menggunakan (6 halaman), Kartu Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman)

Cisco 6961 - Unified IP Phone Standard VoIP Setup Manual
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the Cisco Unified IP Phone on an IP
telephony network:
Before you install a Cisco Unified IP phone, you must decide how to configure the phone in your
Note
network. Then you can install the phone and verify its functionality. For more information, see
Chapter 2, "Preparing to Install the Cisco Unified IP Phone on Your Network."

Before You Begin

Before installing the Cisco Unified IP Phone, review the requirements in these sections:

Network Requirements

For the Cisco Unified IP Phone to successfully operate as a Cisco Unified IP Phone endpoint in your
network, your network must meet the following requirements:
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
Before You Begin, page 3-1
Footstand, page 3-9
Network Requirements, page 3-1
Cisco Unified Communications Manager Configuration, page 3-2
Working VoIP network:
VoIP configured on your Cisco routers and gateways
-
Cisco UnifiedCM installed in your network and configured to handle call processing
-
IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask
3
C H A P T E R
3-1