Cisco 6961 - Unified IP Phone Standard VoIP Setup Manual - Halaman 14

Jelajahi secara online atau unduh pdf Setup Manual untuk Telepon IP Cisco 6961 - Unified IP Phone Standard VoIP. Cisco 6961 - Unified IP Phone Standard VoIP 16 halaman. Unified communications manager express
Juga untuk Cisco 6961 - Unified IP Phone Standard VoIP: Lembar data (5 halaman), Catatan Rilis (18 halaman), Lembar data (5 halaman), Panduan Pengguna (38 halaman), Panduan Administrasi (14 halaman), Fitur (29 halaman), Panduan Referensi (4 halaman), Panduan Administrasi (19 halaman), Panduan Untuk Menggunakan (6 halaman), Kartu Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman)

Cisco 6961 - Unified IP Phone Standard VoIP Setup Manual

Mounting the Phone to the Wall

Lower Viewing Angle

Mounting the Phone to the Wall
You can mount the Cisco Unified IP Phone on the wall by using special brackets available in a
Cisco Unified IP Phone wall mount kit. For information on installing the wall mount kit, see
Appendix E, "Installing the Wall Mount Kit for the Cisco Unified IP Phone 6921, 6941, 6945, and 6961"
or
Appendix F, "Cisco Unified IP Phone Non-Lockable Wall Mount."
Wall mount kits are ordered separately from the phone.
Note

Verifying the Phone Startup Process

After the Cisco Unified IP Phone has power connected to it, the phone begins its startup diagnostic
process by cycling through the following steps.
1.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
3-14
The following LED buttons flash on and off during the various stages of boot up as the phone checks
its hardware. See
Table 3-2
for a list of the hardware test and the LED diagnostic status.
Chapter
OL-24567-01