Cisco 7911 Manuel de démarrage rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 7911. Cisco 7911 18 pages. Cisco systems ip phone user manual
Également pour Cisco 7911 : Manuel de l'utilisateur (19 pages), Manuel de l'utilisateur (12 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (7 pages), Manuel de l'utilisateur (7 pages), Manuel (2 pages), Manuel de démarrage rapide (30 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur (4 pages), Aide-mémoire (2 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (7 pages)

Basic Features

1. Connect an Ethernet cable to the Network port (left port) on the phone. The other end of the Ethernet

cable must be plugged into a powered Ethernet jack. All VoIP-capable Ethernet jacks are marked

with a red dot.

2. Connect the handset to its respective port.

3. Connect the Ethernet cable from your Desktop PC to the Access Port on the IP Phone (right port -

optional).

4. Connect the power plug to the DC48V AC Adapter port (optional).

Note: Before successfully installing the phone, the system administrator must prepare the network for

the phone.

There are three options for placing a new call.

•

Lift the handset and dial the number.

•

Press the NewCall soft key and dial the number.

•

Press a two-digit Speed Dial index code and press the AbbrDial soft key.

Internal Extension:

Dial the 4-digit extension

External Local Call:

Dial 3 + the entire 7-digit phone number

Long Distance:

Dial 3 + 1 the entire 10-digit phone number (area code + number)

Notes: After you press the 3 (for an outside line) you will hear a dial tone again to let you know you are

accessing an external line.

Pick up the handset. If you do not hear a dial tone, press an available line button to begin making

the call.

Press the SPEAKER button. If you do not hear a dial tone, press an available line button to begin

to make the call or press the NewCall soft key. If you do not hear a dial tone, press an available

line button to begin to make the call (the call will dial with the speakerphone on).

There are two options for answering a call.

•

Lift the Handset.

•

Press the Answer soft key.

There are two options for ending a call.

•

Hang up the Handset.

•

Press the EndCall soft key and hang up.

UMR Information Technology

Quick Start Guide: Cisco 7911 IP Telephone – 5