Cisco 7911 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Cisco 7911에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7911 18 페이지. Cisco systems ip phone user manual
Cisco 7911에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 설명서 (12 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (7 페이지), 사용자 설명서 (7 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (30 페이지), 빠른 참조 사용 설명서 (2 페이지), 사용자 설명서 (4 페이지), 치트 시트 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (7 페이지)

Basic Features

1. Connect an Ethernet cable to the Network port (left port) on the phone. The other end of the Ethernet

cable must be plugged into a powered Ethernet jack. All VoIP-capable Ethernet jacks are marked

with a red dot.

2. Connect the handset to its respective port.

3. Connect the Ethernet cable from your Desktop PC to the Access Port on the IP Phone (right port -

optional).

4. Connect the power plug to the DC48V AC Adapter port (optional).

Note: Before successfully installing the phone, the system administrator must prepare the network for

the phone.

There are three options for placing a new call.

•

Lift the handset and dial the number.

•

Press the NewCall soft key and dial the number.

•

Press a two-digit Speed Dial index code and press the AbbrDial soft key.

Internal Extension:

Dial the 4-digit extension

External Local Call:

Dial 3 + the entire 7-digit phone number

Long Distance:

Dial 3 + 1 the entire 10-digit phone number (area code + number)

Notes: After you press the 3 (for an outside line) you will hear a dial tone again to let you know you are

accessing an external line.

Pick up the handset. If you do not hear a dial tone, press an available line button to begin making

the call.

Press the SPEAKER button. If you do not hear a dial tone, press an available line button to begin

to make the call or press the NewCall soft key. If you do not hear a dial tone, press an available

line button to begin to make the call (the call will dial with the speakerphone on).

There are two options for answering a call.

•

Lift the Handset.

•

Press the Answer soft key.

There are two options for ending a call.

•

Hang up the Handset.

•

Press the EndCall soft key and hang up.

UMR Information Technology

Quick Start Guide: Cisco 7911 IP Telephone – 5