Epson BrightLink 480i Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Epson BrightLink 480i. Epson BrightLink 480i 5 pages. Lamp and status information
Également pour Epson BrightLink 480i : Commencer ici Manuel (6 pages), Manuel d'utilisation (47 pages), Manuel de connexion (6 pages), Manuel d'installation (5 pages), Gabarit de montage (5 pages), Spécifications (6 pages), Déclaration de conformité (4 pages), Manuel d'installation (3 pages), Manuel d'installation (2 pages), Commencer ici Manuel (6 pages)

Epson BrightLink 475Wi / 480i / 485Wi

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to

the side in case the lamp is broken.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

4. Slide off the lamp cover.

INSTALLATION HANDBOOK

Lamp and Status Information