Epson BrightLink 480i Installation Handbook

Browse online or download pdf Installation Handbook for Projector Epson BrightLink 480i. Epson BrightLink 480i 5 pages. Lamp and status information
Also for Epson BrightLink 480i: Start Here Manual (6 pages), Operation Manual (47 pages), Connection Manual (6 pages), Installation Manual (5 pages), Mounting Template (5 pages), Specifications (6 pages), Declaration Of Conformity (4 pages), Installation Handbook (3 pages), Installation Handbook (2 pages), Start Here Manual (6 pages)

Print Page
Epson BrightLink 480i Installation Handbook
Epson BrightLink 475Wi / 480i / 485Wi
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted on the wall or ceiling.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful
removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to
the side in case the lamp is broken.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.
4. Slide off the lamp cover.
INSTALLATION HANDBOOK
Lamp and Status Information
1