Cisco 7962 Référence rapide - Page 3

Imprimer la page

DISPLAY CONTRAST

1. Press the

Settings

button.

2. Press 1 on the dial pad, or scroll to User Preferences and select it.

3. Press 4 on the dial pad, or scroll to Contrast and select it.

4. Use the Down / Up soft keys to set the desired contrast.

5. Press the

Save

softkey to save the setting.

VOLUME SETTINGS

Ring

1. With your phone idle, press the

volume.

2. When the ring times out, the setting will be saved automatically.

Handset

1. With the handset Off-Hook, press the

handset volume.

2. Press the

Save

softkey to make the change permanent. If the

softkey is not pressed, the volume returns to the original level when the

handset is placed back On-Hook.

Speaker

1. With the speaker activated, press the

speaker volume.

2. Press the

Save

softkey to make the change permanent. If the

softkey is not pressed, the volume returns to the original level when the

speaker is deactivated.

Headset

1. With the headset activated, press the

headset volume.

2. Press the

Save

softkey to make the change permanent. If the

softkey is not pressed, the volume returns to the original level when the

headset is deactivated.

SRST (Failover) MODE

1. When phones are in SRST mode, "Network Failure—SRST Mode" is dis-

played on the phone.

2. Calls within the site operate normally (dial extensions as listed above)

3. External calls operate as usually. Dial

4. Some features may not be available during this time.

Volume Control

key to adjust the ring

Volume Control

key to adjust the

Save

Volume Control

key to adjust the

Save

Volume Control

key to adjust the

Save

+ desired number.

DoE— Kahuku HIS 7/2014

ANSWERING AN ADDITIONAL CALL

1. While on a call you will hear a call waiting beep indicating a new incoming

call.

2. Press the

Answer

softkey to automatically put the first call on hold and

answer the incoming call.

PLACE A CALL ON HOLD

1. During a call, press the

Hold

2. To return to the held call, press the

3. If multiple calls are on hold, use the

press the

Resume

softkey to return to the held call.

ENDING A CALL

1. To disconnect from a call, place the Handset in the cradle, press the

Speaker

button,

Headset

button, or the

CALL TRANSFER

1. With a call in progress, press the

placed on hold.

2. Dial the number/extension to which you want to transfer the call.

3. Then perform one of the following:



Blind Transfer — when you hear ringing press the

disconnect from the call to complete the transfer.



Supervised Transfer — announce call to called party then press the

Transfer

softkey or disconnect from the call to complete the transfer.



Cancel the transfer — press the

you from the called party. Press the

held call.

To transfer a caller directly to a voicemail box, dial

CONFERENCE CALL

1. With a call in progress, press the

are placed on hold.

2. Dial the number/extension of the party you wish to add to the call.

3. When the party answers, press the

conference.

4. Repeat steps 1 - 3 to add more callers.

Notes:



The maximum callers in a conference are 8.



Only the initiator can add additional parties to the conference.



The conference remains up if the initiator disconnects.



There must be at least one internal party on the conference call or else the

call will drop.

softkey.

Resume

softkey.

Navigation

button to select a call then

End Call

softkey.

Transfer

softkey. The current caller is

Transfer

End Call

softkey which will disconnect

Resume

softkey to return to the

+ extension

Confrn

softkey. The current caller(s) is/

Confrn

softkey to add this party to the

DoE— Kahuku HIS 7/2014

softkey or