DISPLAY CONTRAST
1. Press the
Settings
button.
2. Press 1 on the dial pad, or scroll to User Preferences and select it.
3. Press 4 on the dial pad, or scroll to Contrast and select it.
4. Use the Down / Up soft keys to set the desired contrast.
5. Press the
Save
softkey to save the setting.
VOLUME SETTINGS
Ring
1. With your phone idle, press the
volume.
2. When the ring times out, the setting will be saved automatically.
Handset
1. With the handset Off-Hook, press the
handset volume.
2. Press the
Save
softkey to make the change permanent. If the
softkey is not pressed, the volume returns to the original level when the
handset is placed back On-Hook.
Speaker
1. With the speaker activated, press the
speaker volume.
2. Press the
Save
softkey to make the change permanent. If the
softkey is not pressed, the volume returns to the original level when the
speaker is deactivated.
Headset
1. With the headset activated, press the
headset volume.
2. Press the
Save
softkey to make the change permanent. If the
softkey is not pressed, the volume returns to the original level when the
headset is deactivated.
SRST (Failover) MODE
1. When phones are in SRST mode, "Network Failure—SRST Mode" is dis-
played on the phone.
2. Calls within the site operate normally (dial extensions as listed above)
3. External calls operate as usually. Dial
4. Some features may not be available during this time.
Volume Control
key to adjust the ring
Volume Control
key to adjust the
Save
Volume Control
key to adjust the
Save
Volume Control
key to adjust the
Save
8
+ desired number.
6
DoE— Kahuku HIS 7/2014
ANSWERING AN ADDITIONAL CALL
1. While on a call you will hear a call waiting beep indicating a new incoming
call.
2. Press the
Answer
softkey to automatically put the first call on hold and
answer the incoming call.
PLACE A CALL ON HOLD
1. During a call, press the
Hold
2. To return to the held call, press the
3. If multiple calls are on hold, use the
press the
Resume
softkey to return to the held call.
ENDING A CALL
1. To disconnect from a call, place the Handset in the cradle, press the
Speaker
button,
Headset
button, or the
CALL TRANSFER
1. With a call in progress, press the
placed on hold.
2. Dial the number/extension to which you want to transfer the call.
3. Then perform one of the following:
Blind Transfer — when you hear ringing press the
disconnect from the call to complete the transfer.
Supervised Transfer — announce call to called party then press the
Transfer
softkey or disconnect from the call to complete the transfer.
Cancel the transfer — press the
you from the called party. Press the
held call.
4.
To transfer a caller directly to a voicemail box, dial
CONFERENCE CALL
1. With a call in progress, press the
are placed on hold.
2. Dial the number/extension of the party you wish to add to the call.
3. When the party answers, press the
conference.
4. Repeat steps 1 - 3 to add more callers.
Notes:
The maximum callers in a conference are 8.
Only the initiator can add additional parties to the conference.
The conference remains up if the initiator disconnects.
There must be at least one internal party on the conference call or else the
call will drop.
softkey.
Resume
softkey.
Navigation
button to select a call then
End Call
softkey.
Transfer
softkey. The current caller is
Transfer
End Call
softkey which will disconnect
Resume
softkey to return to the
*
+ extension
Confrn
softkey. The current caller(s) is/
Confrn
softkey to add this party to the
3
DoE— Kahuku HIS 7/2014
softkey or
페이지 인쇄