Cisco 8000 Series Préparer l'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Préparer l'installation pour {nom_de_la_catégorie} Cisco 8000 Series. Cisco 8000 Series 10 pages. Ip phones with multiplatform firmware
Également pour Cisco 8000 Series : Manuel d'installation (39 pages)
Imprimer la page
Clearance Requirements
(4) Outside of the rack (no clearance required)
(5) Rear chassis width
(6) Clearance required for the fan tray handle at the
rear
(7) Rear service area for the fan tray and fabric card
replacement
Following figure shows the clearances required for the cable management of Cisco 8800 Series Routers.
Figure 4: Clearances Required Around the Chassis Door
(1) Overall door width on side (in an open position)
(2) Maximum vertical rack rail setback, when filters
are installed on the chassis
Prepare for Installation
10
(11) Front service area for the line card replacement
(12) Front chassis width
(13) Airflow direction
(3) Depth of cable management
(4) Overall door depth on front (in an open position)
Prepare for Installation