Cisco 8000 Series Підготовка до встановлення - Сторінка 10

Переглянути онлайн або завантажити pdf Підготовка до встановлення для IP-телефон Cisco 8000 Series. Cisco 8000 Series 10 сторінок. Ip phones with multiplatform firmware
Також для Cisco 8000 Series: Посібник з монтажу (39 сторінок)

Cisco 8000 Series Підготовка до встановлення
Clearance Requirements
(4) Outside of the rack (no clearance required)
(5) Rear chassis width
(6) Clearance required for the fan tray handle at the
rear
(7) Rear service area for the fan tray and fabric card
replacement
Following figure shows the clearances required for the cable management of Cisco 8800 Series Routers.
Figure 4: Clearances Required Around the Chassis Door
(1) Overall door width on side (in an open position)
(2) Maximum vertical rack rail setback, when filters
are installed on the chassis
Prepare for Installation
10
(11) Front service area for the line card replacement
(12) Front chassis width
(13) Airflow direction
(3) Depth of cable management
(4) Overall door depth on front (in an open position)
Prepare for Installation