Cisco 8941 Manuel d'administration - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'administration pour {nom_de_la_catégorie} Cisco 8941. Cisco 8941 16 pages. Unified ip phone
Également pour Cisco 8941 : Fiche technique (5 pages), Manuel de l'utilisateur (42 pages), Notes de mise à jour (16 pages), Manuel de l'utilisateur (24 pages), Démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages), Manuel de référence rapide (5 pages), Référence rapide (2 pages), Manuel de référence (28 pages), Manuel de l'utilisateur (20 pages)

Imprimer la page
Cisco 8941 Manuel d'administration
Cisco Unified IP Phone Installation
Option
Admin. VLAN ID
PC VLAN
SW Port Setup
Description
Auxiliary VLAN in which the phone is a
member.
Used only if the phone does not receive an
auxiliary VLAN from the switch; otherwise
it is ignored.
Allows the phone to interoperate with
third-party switches that do not support a
voice VLAN. The Admin VLAN ID option
must be set before you can change this
option.
Speed and duplex of the network port. Valid
values are:
• Auto Negotiate
• 1000 Full: 1000-BaseT/full duplex
(Supported only for Cisco Unified IP
Phone 8945.)
• 100 Half: 100-BaseT/half duplex
• 100 Full: 100-BaseT/full duplex
• 10 Half: 10-BaseT/half duplex
• 10 Full: 10-BaseT/full duplex
If the phone is connected to a switch,
configure the port on the switch to the same
speed/duplex as the phone, or configure
both to autonegotiate.
If you change the setting of this option, you
must change the PC Port Configuration
option to the same setting.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
Configure Network Settings
To change
Set Admin VLAN ID Field, on page
10
Set PC VLAN Field, on page 11
Set SW Port Setup Field, on page
11
and SIP)
7