Cisco 8941 Administration Manual - Page 7

Browse online or download pdf Administration Manual for IP Phone Cisco 8941. Cisco 8941 16 pages. Unified ip phone
Also for Cisco 8941: Datasheet (5 pages), User Manual (42 pages), Release Notes (16 pages), User Manual (24 pages), Quick Start (2 pages), Quick Start Manual (2 pages), Quick Reference Manual (5 pages), Quick Reference (2 pages), Reference Manual (28 pages), User Manual (20 pages)

Print Page

Cisco Unified IP Phone Installation

Option

Admin. VLAN ID

PC VLAN

SW Port Setup

Description

Auxiliary VLAN in which the phone is a

member.

Used only if the phone does not receive an

auxiliary VLAN from the switch; otherwise

it is ignored.

Allows the phone to interoperate with

third-party switches that do not support a

voice VLAN. The Admin VLAN ID option

must be set before you can change this

option.

Speed and duplex of the network port. Valid

values are:

• Auto Negotiate

• 1000 Full: 1000-BaseT/full duplex

(Supported only for Cisco Unified IP

Phone 8945.)

• 100 Half: 100-BaseT/half duplex

• 100 Full: 100-BaseT/full duplex

• 10 Half: 10-BaseT/half duplex

• 10 Full: 10-BaseT/full duplex

If the phone is connected to a switch,

configure the port on the switch to the same

speed/duplex as the phone, or configure

both to autonegotiate.

If you change the setting of this option, you

must change the PC Port Configuration

option to the same setting.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP

Configure Network Settings

To change

Set Admin VLAN ID Field, on page

Set PC VLAN Field, on page 11

Set SW Port Setup Field, on page

and SIP)