Cisco 8945 Manuel d'administration - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'administration pour {nom_de_la_catégorie} Cisco 8945. Cisco 8945 16 pages. Unified ip standard phone
Également pour Cisco 8945 : Fiche technique (5 pages), Manuel de l'utilisateur (42 pages), Notes de mise à jour (16 pages), Manuel de l'utilisateur (24 pages), Démarrage rapide (2 pages), Manuel de démarrage rapide (4 pages), Manuel de l'utilisateur (2 pages), Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur (8 pages), Manuel de l'utilisateur (2 pages), Manuel de référence rapide (5 pages), Référence rapide (2 pages), Manuel de l'utilisateur (2 pages), Manuel de l'utilisateur (3 pages), Manuel de formation (31 pages), Caractéristiques Manuel (4 pages), Coup d'œil rapide (3 pages), Manuel de référence (28 pages), Manuel de l'utilisateur (20 pages), Pour commencer (29 pages)

Imprimer la page
Cisco 8945 Manuel d'administration

Set TFTP Server 2 Field

Set TFTP Server 2 Field
Procedure
Step 1
Unlock the CTL or ITL file if necessary (for example, if you are changing the administrative domain of the
phone). If both the CTL and ITL files exist, unlock either of the files.
Step 2
Unlock network configuration options.
Step 3
Enter an IP address for the TFTP Server 1 option.
Step 4
Scroll to the TFTP Server 2 option, press Select, and enter a new backup TFTP server IP address. If there is
no secondary TFTP Server, you can use Delete to clear the field of a previous value.
Step 5
Press Apply and then press Save.
Set Secondary Load Server
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Select Load server.
Step 3
Enter the server hostname or IP address.

Set DHCP Address Released Field

Procedure
Step 1
Scroll to the DHCP Address Released option and press Edit.
Step 2
Press Yes to release the DHCP Address.

Phone Startup Process

After the Cisco Unified IP Phone has power connected to it, the phone begins its startup diagnostic process
by cycling through the following steps.
1 The following LED buttons flash on and off during the various stages of bootup as the phone checks its
hardware. See the following table for a list of the hardware test and the LED diagnostic status.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
14
Cisco Unified IP Phone Installation