Cisco 8945 Administratiehandleiding - Pagina 14

Blader online of download pdf Administratiehandleiding voor {categorie_naam} Cisco 8945. Cisco 8945 16 pagina's. Unified ip standard phone
Ook voor Cisco 8945: Gegevensblad (5 pagina's), Gebruikershandleiding (42 pagina's), Release-opmerkingen (16 pagina's), Gebruikershandleiding (24 pagina's), Snel aan de slag (2 pagina's), Snelstarthandleiding (4 pagina's), Gebruikershandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (8 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentiehandleiding (5 pagina's), Snelle referentie (2 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (3 pagina's), Trainingshandleiding (31 pagina's), Functies Handleiding (4 pagina's), Snelle blik (3 pagina's), Referentiehandleiding (28 pagina's), Gebruikershandleiding (20 pagina's), Aan de slag (29 pagina's)

Set TFTP Server 2 Field

Procedure

Step 1

Unlock the CTL or ITL file if necessary (for example, if you are changing the administrative domain of the

phone). If both the CTL and ITL files exist, unlock either of the files.

Step 2

Unlock network configuration options.

Step 3

Enter an IP address for the TFTP Server 1 option.

Step 4

Scroll to the TFTP Server 2 option, press Select, and enter a new backup TFTP server IP address. If there is

no secondary TFTP Server, you can use Delete to clear the field of a previous value.

Step 5

Press Apply and then press Save.

Set Secondary Load Server

Procedure

Step 1

From Cisco Unified Communications Manager Administration, choose Device > Phone.

Step 2

Select Load server.

Step 3

Enter the server hostname or IP address.

Procedure

Step 1

Scroll to the DHCP Address Released option and press Edit.

Step 2

Press Yes to release the DHCP Address.

After the Cisco Unified IP Phone has power connected to it, the phone begins its startup diagnostic process

by cycling through the following steps.

1 The following LED buttons flash on and off during the various stages of bootup as the phone checks its

hardware. See the following table for a list of the hardware test and the LED diagnostic status.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0

(SCCP and SIP)

Cisco Unified IP Phone Installation