Cisco Aironet 521 Manuel - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco Aironet 521. Cisco Aironet 521 35 pages. Ip phones with multiplatform firmware
Également pour Cisco Aironet 521 : Manuel de l'utilisateur (46 pages), Manuel de démarrage rapide (26 pages), Manuel (40 pages), Manuel d'administration (48 pages), Manuel d'installation (39 pages), Manuel (24 pages)

Step 9

If you need additional security, you can secure the access point to a

nearby immovable object using a Kensington lock and security

cable.

Step 10 Verify that the access point is operating properly and then replace

the ceiling tile.

Mounting on a Network Cable Box

Follow these steps to mount the access point on a network cable box.

Step 1

Position the mounting plate over the network cable box and align

the two mounting holes (labeled X) with the network cable box

holes.

Step 2

Hold the mounting plate and insert a 6 x 32 x 1/4 in. pan head screw

into each of the two X mounting holes and tighten.

Step 3

Pull the access point cables out of the network box until there is

about 1 ft. of exposed cables protruding from the box.

Step 4

Attach the access point to the mounting plate.

Step 5

Connect the cables to the access point.

Quick Start Guide: Cisco 521 Wireless Express Access Point