Cisco Aironet 521 매뉴얼 - 페이지 21

{카테고리_이름} Cisco Aironet 521에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 521 35 페이지. Ip phones with multiplatform firmware
Cisco Aironet 521에 대해서도 마찬가지입니다: 사용자 설명서 (46 페이지), 빠른 시작 매뉴얼 (26 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (24 페이지)

페이지 인쇄
Cisco Aironet 521 매뉴얼
Step 9
If you need additional security, you can secure the access point to a
nearby immovable object using a Kensington lock and security
cable.
Step 10 Verify that the access point is operating properly and then replace
the ceiling tile.

Mounting on a Network Cable Box

Follow these steps to mount the access point on a network cable box.
Step 1
Position the mounting plate over the network cable box and align
the two mounting holes (labeled X) with the network cable box
holes.
Step 2
Hold the mounting plate and insert a 6 x 32 x 1/4 in. pan head screw
into each of the two X mounting holes and tighten.
Step 3
Pull the access point cables out of the network box until there is
about 1 ft. of exposed cables protruding from the box.
Step 4
Attach the access point to the mounting plate.
Step 5
Connect the cables to the access point.
Quick Start Guide: Cisco 521 Wireless Express Access Point
21