Ricoh Martini-C3 Bulletin technique - Page 29
Parcourez en ligne ou téléchargez le pdf Bulletin technique pour {nom_de_la_catégorie} Ricoh Martini-C3. Ricoh Martini-C3 36 pages.
SC876
D
Log Data Error
The log data has been corrupted at power on, while the machine was
operating, or when the machine was powered off during a print or copy cycle.
The machine should never be switched off while it is printing or copying.
SC876-1
Log data file was corrupted at power on or
while the machine was operating.
SC876-2
The log was set for encryption without the
encryption module installed:
At power on
While the machine was operating
When the log encryption setting was
changed.
SC876-3
At power on the log encryption key was
disabled, causing an NVRAM malfunction.
SC876-4
At power on the machine attempted log data
encryption with the log encryption setting
disabled (NVRAM malfunction).
-or-
At power on log encryption was attempted
with the log encryption setting disabled
(NVRAM malfunction).
SC876-5
Error occurred at power on.
Only the NVRAM was replaced with an
NVRAM from another machine.
-or-
Only the HDD was replaced with an HDD unit
from another machine.
SC876-99
Cause unknown. The error occurred at power
on or while the machine was operating.
Format the HDD with SP5832-
004.
Install or replace and set the
encryption module.
Enable the log encryption
setting.
Format the disk with SP5832-
004.
Format the disk with SP5832-
004.
Replace NVRAM with original
NVRAM.
Replace HDD with original
HDD.
If the error persists, format the
HDD with SP5832-004.
Contact Ricoh design section.
4-32
February 2008