Ricoh Martini-C3 Technical Bulletin - Page 29

Browse online or download pdf Technical Bulletin for Printer Ricoh Martini-C3. Ricoh Martini-C3 36 pages.

Print Page

SC876

Log Data Error

The log data has been corrupted at power on, while the machine was

operating, or when the machine was powered off during a print or copy cycle.

The machine should never be switched off while it is printing or copying.

SC876-1

Log data file was corrupted at power on or

while the machine was operating.

SC876-2

The log was set for encryption without the

encryption module installed:

At power on

While the machine was operating

When the log encryption setting was

changed.

SC876-3

At power on the log encryption key was

disabled, causing an NVRAM malfunction.

SC876-4

At power on the machine attempted log data

encryption with the log encryption setting

disabled (NVRAM malfunction).

-or-

At power on log encryption was attempted

with the log encryption setting disabled

(NVRAM malfunction).

SC876-5

Error occurred at power on.

Only the NVRAM was replaced with an

NVRAM from another machine.

-or-

Only the HDD was replaced with an HDD unit

from another machine.

SC876-99

Cause unknown. The error occurred at power

on or while the machine was operating.

Format the HDD with SP5832-

004.

Install or replace and set the

encryption module.

Enable the log encryption

setting.

Format the disk with SP5832-

004.

Format the disk with SP5832-

004.

Replace NVRAM with original

NVRAM.

Replace HDD with original

HDD.

If the error persists, format the

HDD with SP5832-004.

Contact Ricoh design section.

4-32

February 2008