Ricoh Rh 100 Manuel rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Ricoh Rh 100. Ricoh Rh 100 4 pages.
Également pour Ricoh Rh 100 : Manuel d'utilisation (26 pages)

Imprimer la page

Preparation

Loading the fabric in the tray

For details, refer to User's Guide provided with the printer Ri 100.

You can shorten the processing time by putting a garment in the tray while preheating the

finisher.

➊

Press the [Power] key to turn on the power..

➋

Make sure the mode switching lever is set in the

center.

➌

Set the temperature of the heater.

Set the temperature according to the fabric on which

you are printing. The default setting is "High"

Procedure for (

➊

When you move the mode switching lever to the

left, processing starts. An alarm sounds after pre-

heating is completed.

➋

➍

Set the amount of time that the heater is on.

Set the time according to the fabric on which you

are printing. The default setting is "Medium".

➎

When the [Preheat] key is lit, press the [Preheat]

key to start preheating.

When the [Preheat] key is unlit, no operation is

necessary because preheating is completed.

)

Procedure for (

➊

When you move the mode switching lever to the

right, processing starts. An alarm sounds after

preheating is completed.

➋

EN GB

EN US

EN AU

)

J361-6607E