Ricoh Rh 100 Короткий посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Короткий посібник для Принтер Ricoh Rh 100. Ricoh Rh 100 4 сторінки.
Також для Ricoh Rh 100: Інструкція з експлуатації Посібник з експлуатації (26 сторінок)

Preparation

Loading the fabric in the tray

For details, refer to User's Guide provided with the printer Ri 100.

You can shorten the processing time by putting a garment in the tray while preheating the

finisher.

➊

Press the [Power] key to turn on the power..

➋

Make sure the mode switching lever is set in the

center.

➌

Set the temperature of the heater.

Set the temperature according to the fabric on which

you are printing. The default setting is "High"

Procedure for (

➊

When you move the mode switching lever to the

left, processing starts. An alarm sounds after pre-

heating is completed.

➋

➍

Set the amount of time that the heater is on.

Set the time according to the fabric on which you

are printing. The default setting is "Medium".

➎

When the [Preheat] key is lit, press the [Preheat]

key to start preheating.

When the [Preheat] key is unlit, no operation is

necessary because preheating is completed.

)

Procedure for (

➊

When you move the mode switching lever to the

right, processing starts. An alarm sounds after

preheating is completed.

➋

EN GB

EN US

EN AU

)

J361-6607E