ActronAir CP05 Manuel d'installation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ActronAir CP05. ActronAir CP05 16 pages. Control interface
Imprimer la page
CP05 & CP10 CONTROL INTERFACE INSTALLATION GUIDE
DUAL CONTROL CONNECTION INSTALLATION
1.0 Components Required
• 1- Pc Control Interface (Secondary Control Interface to be Purchased Seperately)
• 1- Pc 6 Core Flat 7/0.12 (AWG28) Telephone Cable for lengths up to 50m (Installer to Provide)
• 1- Pc 6 Core (3 Pair) Twisted Pair 7/0.20 (AWG24) Shielded Data Cable for lengths up to 200m
(Installer to Provide)
• 1- Pc 4-Way Connector Block (as required for Tri-Capacity Units- Installer to Provide)
1.1 Dual Control Connection Lay-out (For CM100 Controller Only)
Please refer to Wiring Diagram provided with your unit for wiring details specific to your requirements.
The Dual Control Connection Lay-out below is provided as a guide only.
NOTE:
Use these terminals for
Tri-Capacity models.
6 Core Flat 7/0.12 (AWG28) Telephone Cable
6 Core (3 Pair) Twisted Pair 7/0.20 (AWG24)
Shielded Data Cable 200 Max. Length - Field Scope
ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject to change without notice.
Copyright © 2022 Actron Engineering Pty. Ltd.
Prg
Esc
Tx/Rx
GND
J9 FBus1
J11 BMS2
J14pLAN
J10
1
J12
J13
J15
BMS Card
J16
J17
J18
J27
®
J25
cm
100
J4
J1
input 24V +10% -15% 50-60Hz / 28-36V
max power: 28W/20W
J2
J3
50m Max. Length - Field Scope
(Installer to Provide)
-- or --
(Installer to Provide)
(To be Purchased Separately)
* CP05 or CP10 may be used as Secondary Control Interface.
Refer Control Interface mounting procedure on pages 6-8.
CP10 Control Interface # 1
9:30
Unit: On
Auto
Master Control
o
23.7
C
Return Temp:
o
16.5
C
Supply Temp:
Comp
Rev Vlv
(Supplied & Fitted as Standard)
(Supplied & Fitted as Standard)
J19
J20
J21
J22
J23
J24
Tx/Rx
GND
J28
J29FBus2
J26
2
J8
J5
J7
J6
Control Interface # 2
Remote Mimic Control
CP10 or CP05
CM100 Controller
Electrical Panel
9:30
Unit: On
Auto
23.7
o
C
Return Temp:
Prg
16.5
o
C
Supply Temp:
Comp
Rev Vlv
Esc
9