Cisco 2811 Series Opérations - Page 13
Parcourez en ligne ou téléchargez le pdf Opérations pour {nom_de_la_catégorie} Cisco 2811 Series. Cisco 2811 Series 31 pages. 2800 series integrated services routers
Également pour Cisco 2811 Series : Fiche technique (20 pages), Installation et mise à niveau (14 pages), Opérations (31 pages), Manuel de démarrage rapide (47 pages)
Imprimer la page
The tamper evidence label should be placed so that the one half of the label covers the enclosure and the
Step 5
other half covers the rear panel.
The labels completely cure within five minutes.
Step 6
Figure 7
Figure 7
Figure 8
To apply serialized tamper-evidence labels to the Cisco 2821:
Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based
Step 1
cleaning pads are recommended for this purpose. The temperature of the router should be above 10 C.
The tamper evidence label should be placed so that one half of the label covers the front panel and the
Step 2
other half covers the enclosure.
The tamper evidence label should be placed over the CF card in the slot so that any attempt to remove
Step 3
the card will show sign of tampering.
The tamper evidence label should be placed so that the one half of the label covers the enclosure and the
Step 4
other half covers the port adapter slot.
OL-8663-01
and
Figure 8
show the tamper evidence label placements for the Cisco 2811.
Cisco 2811 Tamper Evident Label Placement (Back View)
Cisco 2811 Tamper Evident Label Placement (Front View)
Cisco 2811 and Cisco 2821 Integrated Services Router FIPS 140-2 Non Proprietary Security Policy
Cisco 2811 and Cisco 2821 Routers
13