Cisco 2811 Series Opérations - Page 14

Parcourez en ligne ou téléchargez le pdf Opérations pour {nom_de_la_catégorie} Cisco 2811 Series. Cisco 2811 Series 31 pages. 2800 series integrated services routers
Également pour Cisco 2811 Series : Fiche technique (20 pages), Installation et mise à niveau (14 pages), Opérations (31 pages), Manuel de démarrage rapide (47 pages)

Imprimer la page

1. Initial Setup

Cisco 2811 and Cisco 2821 Routers

The tamper evidence label should be placed so that the one half of the label covers the enclosure and the

Step 5

other half covers the rear panel.

The labels completely cure within five minutes.

Step 6

Figure 9

Figure 10

The tamper evidence seals are produced from a special thin gauge vinyl with self-adhesive backing. Any

attempt to open the router will damage the tamper evidence seals or the material of the module cover.

Since the tamper evidence seals have non-repeated serial numbers, they can be inspected for damage and

compared against the applied serial numbers to verify that the module has not been tampered. Tamper

evidence seals can also be inspected for signs of tampering, which include the following: curled corners,

bubbling, crinkling, rips, tears, and slices. The word "OPEN" may appear if the label was peeled back.

Cryptographic Key Management

The router securely administers both cryptographic keys and other critical security parameters such as

passwords. The tamper evidence seals provide physical protection for all keys. All keys are also

protected by the password-protection on the Crypto Officer role login, and can be zeroized by the Crypto

Officer. All zeroization consists of overwriting the memory that stored the key. Keys are exchanged and

entered electronically or via Internet Key Exchange (IKE).

Cisco 2811 and Cisco 2821 Integrated Services Router FIPS 140-2 Non Proprietary Security Policy

and

Figure 10

show the tamper evidence label placements for the Cisco 2821.

Cisco 2821 Tamper Evident Label Placement (Back View)

Cisco 2821 Tamper Evident Label Placement (Front View)

OL-8663-01