Cisco 2811 Series Werkzaamheden - Pagina 14
Blader online of download pdf Werkzaamheden voor {categorie_naam} Cisco 2811 Series. Cisco 2811 Series 31 pagina's. 2800 series integrated services routers
Ook voor Cisco 2811 Series: Gegevensblad (20 pagina's), Installeren en upgraden (14 pagina's), Werkzaamheden (31 pagina's), Snelstarthandleiding (47 pagina's)
Pagina afdrukken
Cisco 2811 and Cisco 2821 Routers
The tamper evidence label should be placed so that the one half of the label covers the enclosure and the
Step 5
other half covers the rear panel.
The labels completely cure within five minutes.
Step 6
Figure 9
Figure 9
Figure 10
The tamper evidence seals are produced from a special thin gauge vinyl with self-adhesive backing. Any
attempt to open the router will damage the tamper evidence seals or the material of the module cover.
Since the tamper evidence seals have non-repeated serial numbers, they can be inspected for damage and
compared against the applied serial numbers to verify that the module has not been tampered. Tamper
evidence seals can also be inspected for signs of tampering, which include the following: curled corners,
bubbling, crinkling, rips, tears, and slices. The word "OPEN" may appear if the label was peeled back.
Cryptographic Key Management
The router securely administers both cryptographic keys and other critical security parameters such as
passwords. The tamper evidence seals provide physical protection for all keys. All keys are also
protected by the password-protection on the Crypto Officer role login, and can be zeroized by the Crypto
Officer. All zeroization consists of overwriting the memory that stored the key. Keys are exchanged and
entered electronically or via Internet Key Exchange (IKE).
Cisco 2811 and Cisco 2821 Integrated Services Router FIPS 140-2 Non Proprietary Security Policy
14
and
Figure 10
show the tamper evidence label placements for the Cisco 2821.
Cisco 2821 Tamper Evident Label Placement (Back View)
Cisco 2821 Tamper Evident Label Placement (Front View)
OL-8663-01