Epson EMP-S4 Manuel de démarrage rapide - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Epson EMP-S4. Epson EMP-S4 26 pages. Esc/vp21 command user's guide for business projectors
Également pour Epson EMP-S4 : Manuel d'utilisation (36 pages), Spécifications (2 pages), Manuel de l'utilisateur (25 pages), Manuel de l'utilisateur (25 pages), Manuel de démarrage rapide (12 pages), Manuel de l'utilisateur (28 pages), Manuel de l'utilisateur (28 pages)

Adjusting Position and Focus

(Setting up for the ﬁ rst time or after moving)

Adjusting Projection Size

Enlarge

Raising the Projection Position (Adjusting the front foot)

Correcting Keystone Distortion

If the projector is tilted the image distorts in the

shape of a keystone, you can correct this by doing

the following.

Wide Top

You can adjust the vertical tilt to a maximum of about

30°(20° when projecting a component video image

with a ratio of 16:9).

The greater the angle of tilt, the harder the image is

to focus. Setup the projector at a lower angle of tilt.

If keystone correction or zoom adjustment are performed, the "Image Shift" adjustment screen is

displayed. If you do not want to ﬁ ne tune the projection position, press the

Reduce

* When moving the projector, make sure the front foot is retracted.

Normal

Wide Base

Adjusting Focus

Rear Adjustable Foot

Push up the foot adjust lever.

• You can also make keystone

corrections from the

conﬁ guration menu.

User's Guide "Settings Menu"

• Hold down

for more than one second to

reset the correction value to the

default setting.

• Adjust the horizontal tilt by

turning the left rear foot.

Rear Adjustable

Foot

Extend

and press

Retract