Epson EMP-S4 빠른 시작 매뉴얼 - 페이지 24

{카테고리_이름} Epson EMP-S4에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP-S4 26 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP-S4에 대해서도 마찬가지입니다: 운영 매뉴얼 (36 페이지), 사양 (2 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (25 페이지), 빠른 시작 매뉴얼 (12 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지)

페이지 인쇄

Adjusting Position and Focus

(Setting up for the ﬁ rst time or after moving)

Adjusting Projection Size

Enlarge

Raising the Projection Position (Adjusting the front foot)

Correcting Keystone Distortion

If the projector is tilted the image distorts in the

shape of a keystone, you can correct this by doing

the following.

Wide Top

You can adjust the vertical tilt to a maximum of about

30°(20° when projecting a component video image

with a ratio of 16:9).

The greater the angle of tilt, the harder the image is

to focus. Setup the projector at a lower angle of tilt.

If keystone correction or zoom adjustment are performed, the "Image Shift" adjustment screen is

displayed. If you do not want to ﬁ ne tune the projection position, press the

Reduce

* When moving the projector, make sure the front foot is retracted.

Normal

Wide Base

Adjusting Focus

Rear Adjustable Foot

Push up the foot adjust lever.

• You can also make keystone

corrections from the

conﬁ guration menu.

User's Guide "Settings Menu"

• Hold down

for more than one second to

reset the correction value to the

default setting.

• Adjust the horizontal tilt by

turning the left rear foot.

Rear Adjustable

Foot

Extend

and press

Retract