Cisco NCS 6008 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco NCS 6008. Cisco NCS 6008 12 pages. 6000 series network convergence system routers unpacking, moving, and securing guide
Également pour Cisco NCS 6008 : Manuel de déballage, de déménagement et de sécurisation (44 pages)

Imprimer la page

Configure the XR VM Management Port

6. exit

7. router static address-family ipv4 unicast 0.0.0.0/0 default-gateway

8. commit

DETAILED STEPS

Step 1

configure

Step 2

interface MgmtEth rack/slot/CPU0/port

Example:

RP/0/RP0/CPU0:router(config)#interface mgmtEth 0/RP0/CPU0/0

Enters interface configuration mode for the management interface of the primary RP.

Step 3

ipv4 address ipv4-address subnet-mask

Example:

RP/0/RP0/CPU0:router(config-if)#ipv4 address 10.1.1.1 255.0.0.0

Assigns an IP address and a subnet mask to the interface.

Step 4

ipv4 address ipv4 virtual address subnet-mask

Example:

RP/0/RP0/CPU0:router(config-if)#ipv4 address 1.70.31.160 255.255.0.0

Assigns a virtual IP address and a subnet mask to the interface.

Step 5

no shutdown

Example:

RP/0/RP0/CPU0:router(config-if)#no shutdown

Places the interface in an "up" state.

Step 6

exit

Example:

RP/0/RP0/CPU0:router(config-if)#exit

Exits the Management interface configuration mode.

Step 7

router static address-family ipv4 unicast 0.0.0.0/0 default-gateway

Example:

RP/0/RP0/CPU0:router(config)#router static address-family ipv4 unicast 0.0.0.0/0 12.25.0.1

Specifies the IP address of the default-gateway to configure a static route; this is to be used for communications with

devices on other networks.

Step 8

commit

Bring-up the Cisco NCS 6008 Router