ACU-RITE 02001 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ACU-RITE 02001. ACU-RITE 02001 8 pages. Wireless weather station forecaster
Également pour ACU-RITE 02001 : Manuel d'instruction (8 pages)

Imprimer la page

(

3 • PLACEMENT

)

Main Unit Tilting Display Stand

Now that setup is complete, you must choose a location to place the wireless

sensor and the main unit. The wireless sensor MUST be placed less than 100

feet away from the main unit.

This wireless thermometer uses radio frequency for communication

which is

susceptible to interference from other electronic devices and large metallic

items or thick

walls.

Always place both units at least 3 feet away from

appliances

TV, microwave, radios,

etc.

or objects

large metal surfaces, thick

stone walls,

etc.

that may interfere with the wireless communication

. . . .

' o' ✓.,.

/ I \ '

100

feet maximum

Placement of Main Unit

Place the main unit in a dry area free of dirt and dust. To help ensure

an accurate indoor temperature measurement, be sure to place the

main unit out of direct sunlight, and away from any heat sources or

vents in your home

For the best possible atomic clock reception,

place the main unit with the back side facing

Colorado.

There are 2 placement options for the the main unit. You may hang

the main unit on a wall using the integrated hang holes on the

bottom of the tilting display stand

Alternatively,

you may place the

main unit on a table top or other flat surface and tilt the display for

optimum viewing

Placement of Sensor

The wireless sensor MUST BE PLACED OUTDOORS to observe

outdoor temperatures and relay the outdoor temperature to the main

unit

display.

The wireless sensor must be placed less than 100 feet

from the main unit.

The wireless sensor is water resistant and is designed for outdoor

use.

However, to extend the life of the product, place the wireless

sensor in an area protected from direct weather

elements.

To ensure

an accurate outdoor temperature

measurement,

be sure the wireless

sensor is placed out of direct sunlight and away from any heat

sources.

Table Top

Wall

Placement

Place the main unit

Use the integrated

on a flat table top

dual hang holes to

surface and

mount the main

tilt the display

unit on a wall.

optimum

Use the template

viewing

below to mark

where your

anchors and

screws should be

installed

+ -----------------------+

Template for marking two holes for anchor and screw used for wall mount of tilting display stand

(

4 • OPERATION

)

After the main unit and the wireless sensor are both powered on and wirelessly

synchronized, no further input is required

The atomic clock will automatically

re-synchronize occasionally to ensure the clock is

accurate.

14 Day Learning Mode

This weather station has a patent pending

2cot;' . ,,,

u9°(1J1ill

fourteen day learning mode calibration

process.

,1outdoor

36:w

During this learning mode the weather station

will make altitude calculations that may affect

future

FORECAST

the accuracy of the forecast. Once the 14 day

learning mode process is complete, the learning

mode icon will disappear and the weather

forecast should be ready for superior

operation.

12•f 3 I~

onduor

Forecast Icon

This feature gives you the predicted weather

forecast for the next 12 to 24 hours based on an

advanced algorithm that includes barometric

6/23

12:3 - ,

~ - - " ' - "- " - " - " " ' '

r ..

pressure and

temperature.

This weather station

will provide the most accurate forecast that a

single station weather instrument can

provide.

T111l

8Wireless Signal Reception Icons

The main unit has signal reception icons in the outdoor temperature display area and near

the atomic clock display. If there are a low number of "bars" present, you may experience

no temperature display

..--"

inaccuracy.

In either case, you may need to relocate one

or both of the

units.

If most or all 4 of the bars are present, wireless reception is good and

no action is required. If the atomic clock signal bars are low, the clock may be inaccurate

or may not automatically adjust for daylight saving time !DST).

- 5 -