ACU-RITE 02001 Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Метеостанція ACU-RITE 02001. ACU-RITE 02001 8 сторінок. Wireless weather station forecaster
Також для ACU-RITE 02001: Інструкція з експлуатації (8 сторінок)
Друкувати сторінку
-
-
(
3 • PLACEMENT
)
Main Unit Tilting Display Stand
Now that setup is complete, you must choose a location to place the wireless
sensor and the main unit. The wireless sensor MUST be placed less than 100
feet away from the main unit.
This wireless thermometer uses radio frequency for communication
,
which is
susceptible to interference from other electronic devices and large metallic
items or thick
walls.
Always place both units at least 3 feet away from
appliances
I
TV, microwave, radios,
etc.
I
or objects
I
large metal surfaces, thick
stone walls,
etc.
I
that may interfere with the wireless communication
.
. . . .
' o' ✓.,.
/ I \ '
100
feet maximum
Placement of Main Unit
Place the main unit in a dry area free of dirt and dust. To help ensure
an accurate indoor temperature measurement, be sure to place the
main unit out of direct sunlight, and away from any heat sources or
vents in your home
.
For the best possible atomic clock reception,
place the main unit with the back side facing
Colorado.
There are 2 placement options for the the main unit. You may hang
the main unit on a wall using the integrated hang holes on the
bottom of the tilting display stand
.
Alternatively,
you may place the
main unit on a table top or other flat surface and tilt the display for
optimum viewing
.
Placement of Sensor
The wireless sensor MUST BE PLACED OUTDOORS to observe
outdoor temperatures and relay the outdoor temperature to the main
unit
display.
The wireless sensor must be placed less than 100 feet
from the main unit.
The wireless sensor is water resistant and is designed for outdoor
use.
However, to extend the life of the product, place the wireless
sensor in an area protected from direct weather
elements.
To ensure
an accurate outdoor temperature
measurement,
be sure the wireless
sensor is placed out of direct sunlight and away from any heat
sources.
-
4
-
Table Top
Wall
Placement
Placement
Place the main unit
Use the integrated
on a flat table top
dual hang holes to
surface and
mount the main
tilt the display
unit on a wall.
optimum
Use the template
viewing
.
below to mark
where your
anchors and
screws should be
installed
.
+ -----------------------+
Template for marking two holes for anchor and screw used for wall mount of tilting display stand
.
(
4 • OPERATION
)
After the main unit and the wireless sensor are both powered on and wirelessly
synchronized, no further input is required
.
The atomic clock will automatically
re-synchronize occasionally to ensure the clock is
accurate.
G
14 Day Learning Mode
This weather station has a patent pending
2cot;' . ,,,
u9°(1J1ill
fourteen day learning mode calibration
process.
,1outdoor
36:w
7
During this learning mode the weather station
will make altitude calculations that may affect
future
~
:
FORECAST
the accuracy of the forecast. Once the 14 day
learning mode process is complete, the learning
mode icon will disappear and the weather
forecast should be ready for superior
operation.
12•f 3 I~
onduor
0
Forecast Icon
This feature gives you the predicted weather
forecast for the next 12 to 24 hours based on an
advanced algorithm that includes barometric
6/23
12:3 - ,
57
~ - - " ' - "- " - " - " " ' '
e
r ..
11
pressure and
temperature.
This weather station
will provide the most accurate forecast that a
single station weather instrument can
provide.
T111l
8Wireless Signal Reception Icons
The main unit has signal reception icons in the outdoor temperature display area and near
the atomic clock display. If there are a low number of "bars" present, you may experience
no temperature display
I
..--"
l
or
inaccuracy.
In either case, you may need to relocate one
or both of the
units.
If most or all 4 of the bars are present, wireless reception is good and
no action is required. If the atomic clock signal bars are low, the clock may be inaccurate
or may not automatically adjust for daylight saving time !DST).
- 5 -