Argo ADIAS19DC Manuel d'instructions d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Argo ADIAS19DC. Argo ADIAS19DC 19 pages. Split air conditioner system
Également pour Argo ADIAS19DC : Manuel d'utilisation (17 pages)

Imprimer la page

On the front and rear side of the unit a rectangular

port (with flange) helps during duct mounting.

Outlet conduct

False ceiling

Discarge air duct (optional accessory).

10 - DUCT FOR FRESH AIR

There is a duct connection port ⑯ for drawing in fresh air.

The supplementary fan motor for outside air intake has to be supplied separately and controlled by a bipolar ON-OFF

switch with safety fuses.

Fresh air flow must be about 10% of the total air flow to avoid operating problems and noise.

Open the knock-out hole ⑰ , fix a Ø 120 mm flange on the unit and connect the thermically insulated duct.

•

Install an outside grille with filter inspection port to prevent dust and leaves from entering and fouling the indoor

unit heat exchanger.

Intake coduct

Air intake

Rear and front flange for the air intake.

780 (ADIAS19)

986 (ADIB-CS13)

782 (ADIAS19)

988 (ADIB-CS13)

Remove the filter and pour, inside the condensate

drain pan, 0.5 liter of water. Start the unit checking

for proper drain pump operation.