Argo ADIAS19DC Kurulum Talimatları Kılavuzu - Sayfa 9

Klima Argo ADIAS19DC için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Argo ADIAS19DC 19 sayfaları. Split air conditioner system
Ayrıca Argo ADIAS19DC için: Kullanım Talimatları Kılavuzu (17 sayfalar)

Sayfayı Yazdır
On the front and rear side of the unit a rectangular
K
port (with flange) helps during duct mounting.
Outlet conduct
False ceiling
Discarge air duct (optional accessory).
M

10 - DUCT FOR FRESH AIR

There is a duct connection port ⑯ for drawing in fresh air.
The supplementary fan motor for outside air intake has to be supplied separately and controlled by a bipolar ON-OFF
switch with safety fuses.
Fresh air flow must be about 10% of the total air flow to avoid operating problems and noise.
Open the knock-out hole ⑰ , fix a Ø 120 mm flange on the unit and connect the thermically insulated duct.
•
•
Install an outside grille with filter inspection port to prevent dust and leaves from entering and fouling the indoor
unit heat exchanger.
Intake coduct
Air intake
Rear and front flange for the air intake.
L
780 (ADIAS19)
986 (ADIB-CS13)
782 (ADIAS19)
988 (ADIB-CS13)
Remove the filter and pour, inside the condensate
N
drain pan, 0.5 liter of water. Start the unit checking
for proper drain pump operation.
9
EN