Cisco Wap581 Manuel de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco Wap581. Cisco Wap581 14 pages. Reboot and reset to factory default settings
Également pour Cisco Wap581 : Manuel de démarrage rapide (17 pages), Manuel (10 pages)

Imprimer la page

Enter the default user name: cisco and password: cisco in the User

TEP

Name and Password fields.

Click Login. The Wireless Access Point Setup Wizard appears.

TEP

Follow the Setup Wizard instructions to finish the WAP device

TEP

installation. We strongly recommend that you use the Setup

Wizard for the first installation.The Setup Wizard turns on the Wi-Fi

radio, which allows you to connect wirelessly. For more advanced

configurations, see the Administration Guide. A link to the

Administration Guide is found in

Congratulations, you can now start using your wireless access point.

Suggested Next Steps

Smart Power Source

Smart Power Source is designed for detecting the power source from an

external power adapter or PSE(802.3at and 802.3af). When both external

power adapter and PSE co-exist, the external power adapter will take

higher priority, which means that the power source is from the external

power adapter. It does not matter whether the power source is from

external power adapter or PSE(802.3at and 802.3af), the WAP581 will

operate at the appropriate mode automatically.

Smart Power Source ensures that the WAP581 remains functional when

• 5G radio disabled

• 2.4G radio in 2x2:2ss (spatial-stream) mode

• 2.5GbE(EHT0/PD) downgrade to 1GbE

• 1GbE(ETH1) disabled

In case of an error while installing, try the following troubleshooting

procedures described in this section:

Troubleshooting

If you cannot display the configuration utility, you can test the ability of the

computer to communicate with the device by using ping.

To use ping on a computer running Windows:

Cisco WAP581 Wireless Access Point

Where to Go from

Here.