- ページ 9
無線アクセスポイント Cisco Wap581のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Wap581 14 ページ。 Reboot and reset to factory default settings
Cisco Wap581 にも： クイック・スタート・マニュアル (17 ページ), マニュアル (10 ページ)
ページを印刷する
Enter the default user name: cisco and password: cisco in the User
S
5
TEP
Name and Password fields.
Click Login. The Wireless Access Point Setup Wizard appears.
S
6
TEP
Follow the Setup Wizard instructions to finish the WAP device
S
7
TEP
installation. We strongly recommend that you use the Setup
Wizard for the first installation.The Setup Wizard turns on the Wi-Fi
radio, which allows you to connect wirelessly. For more advanced
configurations, see the Administration Guide. A link to the
Administration Guide is found in
Congratulations, you can now start using your wireless access point.
Suggested Next Steps
7
Smart Power Source
Smart Power Source is designed for detecting the power source from an
external power adapter or PSE(802.3at and 802.3af). When both external
power adapter and PSE co-exist, the external power adapter will take
higher priority, which means that the power source is from the external
power adapter. It does not matter whether the power source is from
external power adapter or PSE(802.3at and 802.3af), the WAP581 will
operate at the appropriate mode automatically.
Smart Power Source ensures that the WAP581 remains functional when
powered by 802.3af only, and automatically adjusts behavior as below:
• 5G radio disabled
• 2.4G radio in 2x2:2ss (spatial-stream) mode
• 2.5GbE(EHT0/PD) downgrade to 1GbE
• 1GbE(ETH1) disabled
In case of an error while installing, try the following troubleshooting
procedures described in this section:
Troubleshooting
If you cannot display the configuration utility, you can test the ability of the
computer to communicate with the device by using ping.
To use ping on a computer running Windows:
Cisco WAP581 Wireless Access Point
Where to Go from
Here.
8