Cisco MCS 7800 Series Commencer - Page 2

Parcourez en ligne ou téléchargez le pdf Commencer pour {nom_de_la_catégorie} Cisco MCS 7800 Series. Cisco MCS 7800 Series 6 pages. Multiplatform phones
Également pour Cisco MCS 7800 Series : Manuel de démarrage rapide (12 pages), Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur final (6 pages), Manuel de démarrage rapide (2 pages), Référence rapide (2 pages), Manuel principal de migration des microprogrammes (31 pages), Manuel de démarrage rapide (2 pages), Manuel (43 pages), Manuel (4 pages), Manuel d'installation (39 pages), Manuel (20 pages), Manuel de démarrage rapide (2 pages)

Install Your New Phone (8800 Series) on Webex Calling (formerly Spark Call)

Procedure

Step 1

Plug the long, straight end of the handset cable into the phone and plug the other end into the handset.

Step 2

Connect the network cable from your network to the network port on the phone.

Step 3

Connect the footstand and adjust the angle of the phone.

a) Insert the curved connectors into the lower slots.

b) Lift the footstand until the connectors snap into the upper slots.

You may need to exert more force than you expect to connect or disconnect the footstand.

c) Adjust the angle of the phone.

Step 4

Plug in the external power supply.

Install Your New Phone (8800 Series) on Webex Calling

(formerly Spark Call)

Your phone comes with everything you need to power it up, connect it to the network, and set it up on your

desk.

To check which phone model you have, press Applications

number field shows your phone model.

If you'd like to see a graphic overview of these steps, see the

Procedure

Step 1

Plug the long, straight end of the handset cable into the phone and plug the other end into the handset.

Step 2

Connect the network cable from your network to the network port on the phone.

Step 3

Connect the footstand and adjust the angle of the phone.

a) Insert the connectors into the slots.

b) Press the footstand until the connectors snap into place.

c) Adjust the angle of the phone.

Step 4

Plug in the external power supply.

If your network provides Power over Ethernet (PoE), your conference phone comes with everything you need

to power it up, connect it to the network, and set it up on your desk. If your network does not provide PoE,

you need these additional supplies: a Cisco IP Conference Phone 7832 PoE Midspan Cable and a Cisco Power

Cube 3.

Get Started with Your New Phone

and select Phone information. The Model

Cisco IP Phone 8800 Series Installation

Guide.